yayın

YAYINLAR

Eklemeli İmalat Eğitim ve Araştırma Merkezinde çalışan akademisyen ve araştırmacıların katkı sunduğu bildiri ve makaleler


Makaleler

  • M. Karasoglu, E. Yasa, E. Tan, S. Kavak, E. Soylemez, M.C. Kushan, “Influence of heat treatments and hot isostatic processes (HIP) on microstructure and mechanical behavior of Ti-6Al-4V alloy produced by Powder Bed Fusion Using Electron Beam (PBF-EB)”, Kovove materialy, vol. 63, issue. 5-6, pp. 331-356, 2025, https://doi.org/10.31577/km.2025.5-6.331
  • E. Soylemez, M.F. Yalcin, O.F. Anlayis, R. Onler, “A phenomenological sintering model of binder-jetted 316L stainless steel parts calibrated by in situ monitoring.”, Powder Metallurgy, 2025, https://doi.org/10.1177/00325899251389513
  • O. Haydari, E. Soylemez, “Geri Dönüştürülmüş Karbon Siyahı Takviyeli Doğal Kauçuk Karışımlarında Yorulma Çatlak İlerlemesi Karakterizasyonu”, Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol. 40, issue. 2, pp. 789-800, 2025, https://doi.org/10.17341/gazimmfd.1408888
  • B. Kirim, E. Soylemez, E. Tan, E. Yasa, “Thermal modeling of variable process parameter effects in powder bed fusion using electron beam”, Rapid Prototyping Journal, 2024, https://doi.org/10.1108/RPJ-04-2024-0186
  • A. Özel, E. Soylemez, “Experimental Investigation of Processing Temperature Effect on Adhesive Bond Strength Between Engineering Thermoplastics in the Plastic Injection Molding Process”, ASME. J. Manuf. Sci. Eng. October 2024; 146(10): 101001., 10.1115/1.4065847
  • A. Arslan, E. Soylemez, “Investigation of the Surface Roughness Effect on the Performance of an X-Band RF Filter Manufactured by Laser Powder Bed Fusion”, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 14, Issue 2, pp. 257-266, Feb 2024, 10.1109/TCPMT.2024.3360099
  • B. Ozcevik, E. Soylemez, B. Bediz, U. Simsek, “Effects of particle damper design parameters on the damping performance of laser powder bed fused structures”, Int J Adv Manuf Technol, 2024, https://doi.org/10.1007/s00170-023-12901-0
  • C.G. Akagündüz, and E. Soylemez, “Optimization of Laser Direct Structuring Process Parameters for Material Extrusion of Polycarbonate”, Advanced Engineering Materials, 2300907, 2023, https://doi.org/10.1002/adem.202300907
  • E. Soylemez, “Capillary force method to improve the green density of binder jet additive manufacturing,” Advanced Manufacturing Research, Vol. 1, No. 1, –5, Jun. 2023, https://doi.org/10.21595/amr.2023.23275
  • R. Onler, A.S. Koca, B. Kirim, and E. Soylemez, “Multi-objective optimization of binder jet additive manufacturing of Co-Cr-Mo using machine learning”, The International Journal of Advanced Manufacturing Technology, pp. 1091 – 1108, 2022
  • E. Soylemez, “High deposition rate approach of selective laser melting through defocused single bead experiments and thermal finite element analysis for Ti-6Al-4V,” Additive Manufacturing, 31, 100984, 2020
  • E. Soylemez, E. Koc, M. Coskun, “Thermo-Mechanical Simulations of Selective Laser Melting for AlSi10Mg Alloy to Predict the Part Scale Deformations,” Progress in Additive Manufacturing, 1 – 14, 2019
Bildiriler 
  • E. Soylemez, M.F. Yalcin, B. Çelik, R. Onler, “In-Situ Monitoring of Sintering for Binder-Jetted SS316L Parts”, AMC2025: Additive Manufacturing Conference Türkiye, Apr 28-30, 2025, Antalya, TR
  • Ö.F. Anlayış, M.F. Yalcin, R. Onler, E. Soylemez, “Numerical Modeling of Sintering Dynamics in Binder-Jetted SS316L Components”, AMC2025: Additive Manufacturing Conference Türkiye, Apr 28-30, 2025, Antalya, TR
  • U. Simsek, B. Ozcevik, E. Soylemez, B. Bediz, Integration of Particle Dampers with Additive Manufacturing for Sustainable Aviation, Towards Sustainable Aviation Summit TSAS2022, Toulouse, France, 18 – 20 October 2022.
  • D. Comi, A. G. Demir, B. Kirim, E. Soylemez*, “Binder Jetting of Pure Copper Parts and Their Characterization”, AMCTURKEY Kusadasi, Turkey, 6 – 8 October 2022.
  • B. Kirim, E. Soylemez*, E. Tan, E. Yasa “Understanding Process Parameters Strategy to Simulate the Thermal Models of Electron Beam Melting”, Advances in Additive Manufacturing with Powder Metallurgy– AMPM22, p. 15-25, Jun 12-15, 2022, Portland, Oregon.
  • E. Yasa, M. Karasoglu, E. Tan, B. Gumus, E. Soylemez, K. Aktas, “An Investigation on the Effect of Reuse and Recycling on Powder Characteristics in Electron Beam Melting”, 20th International Metallurgy&Materials Congress, Virtual, 10-12 June 2021
  • E. Soylemez, “Transient Melt Pool Modeling for the Abrupt Process Parameter Change in Selective Laser Melting Process”, AMCTURKEY Istanbul, Turkey, 17 – 18 October 2019.

  • S. Gunenc, E. Soylemez, “Orientation and Dyeing Effects on Mechanical Strength of the Multijet Fusion Printed Parts, AMCTURKEY Istanbul, Turkey, 17 – 18 October 2019.

  • E. Soylemez, “Transient Melt Pool Modeling for the Abrupt Process Parameter Change in Selective Laser Melting Process”, Additive Manufacturing Conference Istanbul, Turkey, 17 – 18 October 2019.

  • E. Tan, E. Yasa, B. Gümüş, E. Soylemez, K. Aktaş, “On the Use of Inherent Strain Method for Modelling Electron Beam Melting”, 3rd International Conference for Electron Beam Additive Manufacturing, Online, 5-7 October, 2020.

  • E. Soylemez, M.F. Yalcin, B. Çelik, Ö.F. Anlayış, R. Onler, “Numerical Modeling of Sintering for Binder Jetted Parts Enabled by Experimental Observations”, Sim-AM 2025 V International Conference on Simulation for Additive Manufacturing, Sep 9-11, 2025, Pavia, Italy
  • E. Soylemez, E. Sari, M.F. Yalcin, A.C. Cetin, Z. Aslan, B. Bulut, “Magnetic Properties of Binder-Jetted Soft Magnetic Toroidal Inductor”, The 35th Solid Freeform Fabrication Symposium, Aug 11-14, 2024, Austin, Texas, USA
  • E. Soylemez, M.F. Yalcin, O.F. Anlayis, R. Onler, “Finite Element Analysis for Sintering of Binder-Jetted SS316L Parts”, The 35th Solid Freeform Fabrication Symposium, Aug 11-14, 2024, Austin, Texas, USA
  • E. Soylemez, B. Kirim, E. Tan, E. Yasa “Part-Scale Modeling of Ti-6Al-4V in the Electron Beam Melting Process to Estimate Residual Stress-Induced Distortions”, 1st Joint International Symposium on Aerospace Engineering and Mechanics, Jun 25, 2024, Online – Nanjing University.
  • M. Karasoglu, E. Yasa, E. Soylemez, S. Kavak, E. Tan, “Effects of Heat Treatment and Hot Isostatic Pressing Parameters on Mechanical Properties of EBM Ti6Al4V”, AMC2024: Additive Manufacturing Conference Türkiye, Apr 25-27, 2024, Antalya, TR
  • E. Soylemez, E. Sari, A.C. Cetin, Z. Aslan, B. Bulut, H.E. Unluturk, “Soft Magnetic Toroidal Inductor Enabled by Binder Jet Additive Manufacturing”, AMC2024: Additive Manufacturing Conference Türkiye, Apr 25-27, 2024, Antalya, TR
  • E. Soylemez, E. Sari, E. Durna, B. Kirim, “Binder Jet Additive Manufacturing Process Parameters Effect on Magnetic Performance of Fe-50Ni Alloy”, MS&T22: Materials Science & Technology, Oct 09-12, 2022, Pittsburgh, USA
  • A. Koca, B. Kirim, R. Onler; E. Soylemez, “Multi-objective Optimization of Binder Jetting Process Parameters for theCo-Cr-Mo Alloy”, Materials Science & Technology Conference (Virtual), November 2-6, 2020